Product Information

Uses

• For use on above ground treated wood products.
• For use above ground on deck boards, railing, post tops and fence boards.
• Use on areas that have been drilled or saw cut in treated wood deck boards, railing, post tops, fence boards, etc.
• A 946 ml can will protect approx. 330 5/4×6 deck board ends or approx. 220 2×6 deck board ends, coated twice.
• Do not use to recoat pressure treated wood surfaces.
• Do not use for pressure treated wood in ground contact applications or in preserved wood foundations.
• Do not use in dwellings.
• Cut-N-Seal is not recommended to replace pressure treatment.

Application

• The wood surface to be coated should be clean and dry prior to application.
• Cut-N-Seal is ready to use – do not dilute.
• Shake or stir contents before and during use.
• Apply a first coat by brush, allow to absorb, and apply a second coat. Do not spray or dip.
• Apply above 5°C (40°F).
• Do not apply product to wood that will be used in water.
• Do not apply to any body of water.
• Do not contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.

Clean Up & Storage

• Clean equipment (brushes, etc.) with soap and water.
• Store product away from food or feed.
• Keep container tightly closed when not in use.
• Keep from freezing.

Disposal

• Do not reuse empty containers.
• Dispose of empty container in household trash.
• Unused or partially used product should be disposed at provincially or municipally designated hazardous waste disposal sites.